Decorative metal enamel forge
4 l
750 ml
375 ml
Suitable for decorating, protecting and giving a metallic look similar to the slab of interior and exterior surfaces such as doors, railings, fences, balconies, gates, etc.
Great covering power.
Unalterable colors.
Anticorrosive, adherent, durable and elastic forging finishes.
Ease of application.
Filling power.

Tiempo de secado
Dilution .9873
Tiempo de secado
T. Drying 5-6h
Tiempo de secado
T. Repainted 24hours
Tiempo de secado
Performance 10-12m2/L
black forge
forged grey
forge green
Surface preparation

On unpainted surfaces: Sand, clean and remove dust, grease, oil, waxes and small imperfections. Completely remove rust and lamination crusts by sanding, scratching or blasting. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces.

Before applying

Do not apply at temperatures below 10ºC. Ambient relative humidity below 80%. Support temperature above 8ºC. Recommended layer thickness 40-50 Microns per hand

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Once the surface is prepared, apply different primers: On wood and plaster: Apply SEALING PRIMER (Ref. 1717). On iron and steel: Apply SYNTHETIC MINIO (Ref. A1966) or one of our ANTIOXIDANT PRIMERS. On galvanized and light metals: Apply some sample MULTI-ADHERENT PRIMERS. Apply with brush or roller, 1st hand to use or slightly diluted (maximum 5%) with Synthetic and Fatty Diluent 250 (Ref. 9873). The other hands, in use or slightly diluted (maximum 5%), for gun depending on the nozzle and pressure used. Application temperature higher than 10ºC. Apply two or three layers of the product, leaving the repainting time between layers. If you have any questions, please consult the Technical Department.


Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
nth Layers
Necessary amount --
Cookie consent