Martelé oxifer

Metallic antioxidant enamel with high quality martelé effect and decoration
4 l
750 ml
C. TECHNIQUES
Colors
C. APPLICATION

Suitable for decorating and protecting interior and exterior iron surfaces such as doors, railings, street lamps, grilles, gates, machinery and any iron element with metal martelé effect. Conceals surface imperfections.

Unalterable colors.
Filling power.
Hides imperfections
Anticorrosive properties
Glossy finishes
Great covering power.

Tiempo de secado
Dilution .9971
Tiempo de secado
T. Drying 10-15min
Tiempo de secado
T. Repainted 6hours
Tiempo de secado
Performance 8-9m2/L
Colors
silver grey
dark grey
black
copper
bronze
gold
blue
green
silver grey hammered metallic

Surface preparation

On unpainted surfaces: Sand, clean and remove dust, grease, oil, waxes and small imperfections. Completely remove rust and lamination crusts by sanding, scratching or blasting. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces.

Before applying

Do not apply at temperatures below 10ºC. Ambient relative humidity below 80%. Support temperature above 8ºC. Recommended layer thickness 30-40 Microns per hand

How to use

Remove the contents of the container well. Apply with good air renewal. Apply ideal thickness (30 – 40 dry microns per hand). This product can be applied without prior bottom: On iron and steel: Directly apply 2 layers of product or apply ANTIOXIDANT PRIMER and then a hand of product, respecting the repainting times. A gun: Dilute depending on the nozzle used with Fast Drying Synthetic Diluent (Ref. 9971). Brush: When using or slightly diluting 5 - 10% with Fast Drying Synthetic Thinner (Ref. 9971). It is recommended not to overreach to avoid breaking the martelé effect. If you want to obtain the optimal effect, it is advisable to give the final layer to a gun. To give maximum antioxidant protection, a first layer of CONVERTOXIDE (Ref. 9808) can be applied. On galvanized and light metals: Apply MULTI-ADHERENT PRIMER, let dry the recommended time and then apply a layer of the product. A gun: Dilute depending on the nozzle used with Fast Drying Synthetic Diluent (Ref. 9971). Brush: When using or slightly diluting 5 - 10% with Fast Drying Synthetic Thinner (Ref. 9971). It is recommended not to overreach to avoid breaking the martelé effect. If you want to obtain the optimal effect, it is advisable to give the final layer to a gun. If you have any questions, please consult the Technical Department.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --