• Out-of-Stock
Radiator enamel
  • Radiator enamel

Radiator enamel

Synthetic enamel with great filling, covering and leveling power
750 ml

Suitable for painting, restoration and decoration of radiators.

Heat resistance.
Maximum whiteness
Ease of application.
No hanging.
Excellent leveling
Filling power.

Tiempo de secado
Dilution .9873
Tiempo de secado
T. Drying 3-4h
Tiempo de secado
T. Repainted 24hours
Tiempo de secado
Performance 12-14m2/L
satin white

Surface preparation

On unpainted surfaces: Sand, clean and remove dust, grease, oil, waxes and small imperfections. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces.

Before applying

Do not apply at temperatures below 10ºC. Ambient relative humidity below 80%. Support temperature above 8ºC. Recommended layer thickness 30-40 Microns per hand

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Once the surface is prepared, apply different primers: On iron and steel: Apply SYNTHETIC MINIO (Ref. A1966) or any of our ANTIOXIDANT PRIMERS On galvanized and light metals: Apply one of our MULTI-ADHERENT PRIMERS. Apply with brush or roller, 1st hand to use or slightly diluted (maximum 5%) with Synthetic and Fatty Diluent 250 (Ref. 9873). The other hands, in use or slightly diluted (maximum 5%), for gun depending on the nozzle and pressure used. Application temperature higher than 10ºC. Apply two or three layers of the product, leaving the repainting time between layers. If you have any questions, please consult the Technical Department.


Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
nth Layers
Necessary amount --
Cookie consent