- Out-of-Stock
Anticaloric paint
Anticaloric enamel 400ºCSurfaces should be sanded, clean, dry, free of dust, grease, oils and moisture. On rusty surfaces: Brush and sand until the rust is removed.
Before applying
Do not apply at temperatures below 8ºC. Ambient relative humidity below 20%. Support temperature above 8ºC.
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Once the surface is prepared, apply a hand, if it is a brush or roller, to use or slightly diluted (maximum 5%) with Synthetic Diluent of Rapid Drying (Ref. 9971). A gun, depending on the nozzle and pressure used in the application. It does not require prior background.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Surfaces should be sanded, clean, dry, free of dust, grease, oils and moisture. On rusty surfaces: Brush and sand until the rust is removed.
Before applying
Do not apply at temperatures below 8ºC. Ambient relative humidity below 20%. Support temperature above 8ºC.
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Once the surface is prepared, apply a hand, if it is a brush or roller, to use or slightly diluted (maximum 5%) with Synthetic Diluent of Rapid Drying (Ref. 9971). A gun, depending on the nozzle and pressure used in the application. It does not require prior background.
Storage
Store in a cool place. Do not store open or started containers.
Data sheet
- Family
- Enamel
- Surface
- Iron
Steel - Feature Listed 1
- EASE OF APPLICATION
- Feature listed 2
- GOOD COVERAGE
- Subname
- Anticaloric enamel 400ºC
- Feature listed 3
- MAXIMUM PERFORMANCE
- Barpicolor
- No
- Featured product 1
- Ease of application
- Featured product 2
- Good coverage
- Featured product 3
- Maximum performance
- Featured product 4
- Direct on iron and steel
- Featured product 5
- High adhesion
- i-dilution
- .9971
- i-t.drying
- 1-2hours
- i-performance
- 13-16m2/L
- i-n layers
- 1
- I calculate performance
- 15
- Water / solvent
- Solvent
- I calculate layers
- 1
- s-certificate euroclasses 1
- No
- s-certified slippage 2
- No
- s-certified anticorrosive enamels 3
- No
- s-certified mushrooms 4
- No
- s-bacterial certificate 5
- No
- s-certificate guarantee three 6
- No
- s-certificate warranty five 7
- No
- s-certificate guarantee seven 8
- No
- s-certificate guarantee eight 9
- No
- s-certificate guarantee ten 10
- No
- s-certificate guarantee fifteen 11
- No
- s-certificate A 12
- No
- s-certificate A+ 13
- No
- s-certificate B 14
- No
- s-certificate C 15
- No
- s-certificate anti-mold preservative 16
- No
- s-certified UV filter 17
- No
- s-ecolabel 18 certificate
- No
- s-CE certificate 19
- No
- s-certificate anticarbonation 20
- No
- s-certificate Pliolite 21
- No
- s-certificate cidemco 22
- No
Download