Follow us: Facebook Linkedin Instagram

News

BARPIMO and MIRKA define the polishing process with high gloss Lacapol.

This process is going to be advertised in trade journals such as Interempresas,Ferreteria Industrial, Tecnimadera, etc.

Recently, in conjunction with the manufacturer of abrasives, MIRKA, a polishing process has been defined with the high gloss Lacapol 375 product. This process is going to be advertised in trade journals such as Interempresas, Ferreteria Industrial, Tecnimadera, etc.

For over 3 decades, MIRKA has been a leading producer and supplier of abrasives for the automotive and body repair industry, for manufacturers of composites, for the wood sector and for the metal finishing industry.

BARPIMO is a leading manufacturer and supplier of wood varnishes and coatings and paints for decoration, construction and industrial applications. Since the outset, the Barpimo group is firmly committed to  investment in R&D projects and innovation. The quality of their coatings is recognized by the various certificates issued by official bodies accredited by ENAC.

Technical staff from the two companies have established the following

POLISHING PROCESS:

Onto a piece of DMF perfectly sealed with one coat of A1330 POLYACRYLIC UNDERCOAT H.S. 500 ETERNAL and one coat of A1138 FONDIPOL 250 WHITE, and subsequently sanded with 400 and 600-grain sandpaper, a gloss white polyurethane finishing coat of  3477 LACAPOL 375 WHITE GLOSS hardened with K0375 at 50% by volume was applied.

This piece was left to dry at ambient temperature for a minimum of 48 hours before undergoing the polishing process.

 

 

 

With a DEROS sander and a PS1437 polisher the following process was performed:

1. Microstar 1200-grain disc and Microstar 2500-grain disc

2. Polarshine 10 with lamb’s wool pad and Polarshine 10 with foam pad.

After polishing, the appearance of the piece could not be better, having raised the gloss of the piece which must be above 95 units of gloss measured by a glossmeter at a 20º angle. 

Imagen

 

Site Map
Contact

MAIN OFFICES

C/ San Fernando, 116
26300 Nájera, La Rioja (Spain)

T.: (+34) 941 410 000
F.: (+34) 941 410 111

informa@barpimo.com
 

SOCIAL NETWORKS

Facebook Linkedin Instagram

CONTACT YOUR NEAREST LOCAL OFFICE

T.: (+34) 941 410 000
delegations-barpimo-spainDelegations Barpimo Spain

LOCATE OUR DISTRIBUTORS

BARPIMO IN SPAIN

BARPIMO IN THE WORLD:

  • BARPIMO S.A.
    C/ SAN FERNANDO, 116
    CP: 26300 NÁJERA (LA RIOJA)

    T.: (+34) 941 410 000

    VENTAS@BARPIMO.COM

  • RUSSIA

CONTACT SAC (Customer Service Department)

Barpimo S.A. has always focused its efforts on total quality, thus complying with the obligation of a leader in terms of products and services for the customer.

MAIN SAC DEPARTMENT:
T.: (+34) 941 410 000
sac@barpimo.com

SEND US YOUR SUGGESTIONS

QUALITY ASSURANCE CERTIFICATES
QUALITY ASSURANCE CERTIFICATES
The 2014-2015 industrial investment projects have been funded by MINETUR
The 2014-2015 industrial investment projects have been funded by MINETUR
The following projects have been co-financed by the European Regional Development Fund (ERDF), under the Smart Growth Operational Programme 2014-2020, with the purpose of boosting research, technological development, and innovation.
"EPOXY RESIN EMULSIONS FOR HIGH PERFORMANCE WATER-BASED COATINGS"
"DEVELOPMENT OF A NEW RANGE OF HIGHLY EFFECTIVE CATALYTIC PAINTS"
CDTI
“DEVELOPMENT OF FORMULATIONS FOR VARNISHES AND PAINTS EXEMPT FROM HAZARDOUS HEALTH NANOPARTICLES”
OT1. PROMOTE TECHNOLOGICAL DEVELOPMENT; INNOVATION AND A QUALITY RESEARCH
“REPLACEMENT OF HEATING THERMAL GROUPS”
P2. SAVINGS AND ENERGY EFFICIENCY PROJECTS
CDTI
NUEVOS RECUBRIMIENTOS CON APANTALLAMIENTO ELECTROMAGNÉTICO
Agencia de Desarrollo Económico de La Rioja
RESINA ALQUIDICA URETANADA ACUOSA LIBRE DE ISOCIONATOS
PROYECTO FINANCIADO CON LAS DOTACIONES PREVISTAS EN LOS PROGRAMAS PRESUPUESTARIOS DE LA AGENCIA DE DESARROLLO
ECONÓMICO DE LA RIOJA CON CARGO A LAS APLICACIONES PRESUPUESTARIAS CORRESPONDIENTES EN EL PROGRAMA
OPERATIVO FEDER DE LA RIOJA (2014-2020)
CDTI
CDTI
Agencia de Desarrollo Económico de La Rioja
NUEVOS RECUBRIMIENTOS CON APANTALLAMIENTO ELECTROMAGNÉTICO
PROYECTO FINANCIADO CON LAS DOTACIONES PREVISTAS EN LOS PROGRAMAS PRESUPUESTARIOS DE LA AGENCIA DE DESARROLLO
ECONÓMICO DE LA RIOJA CON CARGO A LAS APLICACIONES PRESUPUESTARIAS CORRESPONDIENTES EN EL PROGRAMA
OPERATIVO FEDER DE LA RIOJA (2014-2020)
CDTI
Agencia de Desarrollo Económico de La Rioja
GRAPHENE CORE 3
SUPPORTED BY EUROPEAN COMMUNITY'S HORIZON 2020 FRAMEWORK PROGRAMME (H2020-ADHOC-2014-20) GRANT AGREEMENT N° 881603.

LIGNICOAT
SUPPORTED BY EUROPEAN COMMUNITY'S HORIZON 2020 FRAMEWORK PROGRAMME (H2020-BBI-JTI-2020) PROPOSAL N° 101023342.

Barpimo : Varnishes and Paints
Calcco