Follow us: Facebook Linkedin Instagram

Solutions

paint and container

The paint has separated in the container

Possible causes

Ways of avoiding it

Wrong use of solvent

If it is slightly separated, adding the suitable solvent, slowly and shaking it constantly may give satisfactory results

The paint has been subject to cold and hot conditions

Store the material at the temperature indicated in the specifications. If the separation is produced by excessive heat or cold, the system to use is similar to the one used in e)

Excessive dilution

The specific instructions must be followed for an adequate dilution. If the material has excessive dilution, many a time the addition of paint will return the lot to its normal state.

The paint thinner has been added too quickly without shaking it sufficiently

Add the paint thinner slowly, shaking constantly.

Natural oxidation of the paint if the container is left open for a certain period

If the oxidation is not very serious, the paint will return to its normal condition by adding the necessary amount of paint thinner and new paint. Usually, choosing a stronger paint thinner is better than the first one recommended


Note: if the paint is mostly separated, it may not be possible to restore it for use.

Previous·Back·Next
Site Map
Contact

MAIN OFFICES

C/ San Fernando, 116
26300 Nájera, La Rioja (Spain)

T.: (+34) 941 410 000
F.: (+34) 941 410 111

informa@barpimo.com
 

SOCIAL NETWORKS

Facebook Linkedin Instagram

CONTACT YOUR NEAREST LOCAL OFFICE

T.: (+34) 941 410 000
delegations-barpimo-spainDelegations Barpimo Spain

LOCATE OUR DISTRIBUTORS

BARPIMO IN SPAIN

BARPIMO IN THE WORLD:

  • BARPIMO S.A.
    C/ SAN FERNANDO, 116
    CP: 26300 NÁJERA (LA RIOJA)

    T.: (+34) 941 410 000

    VENTAS@BARPIMO.COM

  • RUSSIA

CONTACT SAC (Customer Service Department)

Barpimo S.A. has always focused its efforts on total quality, thus complying with the obligation of a leader in terms of products and services for the customer.

MAIN SAC DEPARTMENT:
T.: (+34) 941 410 000
sac@barpimo.com

SEND US YOUR SUGGESTIONS

QUALITY ASSURANCE CERTIFICATES
QUALITY ASSURANCE CERTIFICATES
The 2014-2015 industrial investment projects have been funded by MINETUR
The 2014-2015 industrial investment projects have been funded by MINETUR
The following projects have been co-financed by the European Regional Development Fund (ERDF), under the Smart Growth Operational Programme 2014-2020, with the purpose of boosting research, technological development, and innovation.
"EPOXY RESIN EMULSIONS FOR HIGH PERFORMANCE WATER-BASED COATINGS"
"DEVELOPMENT OF A NEW RANGE OF HIGHLY EFFECTIVE CATALYTIC PAINTS"
CDTI
“DEVELOPMENT OF FORMULATIONS FOR VARNISHES AND PAINTS EXEMPT FROM HAZARDOUS HEALTH NANOPARTICLES”
OT1. PROMOTE TECHNOLOGICAL DEVELOPMENT; INNOVATION AND A QUALITY RESEARCH
“REPLACEMENT OF HEATING THERMAL GROUPS”
P2. SAVINGS AND ENERGY EFFICIENCY PROJECTS
CDTI
NUEVOS RECUBRIMIENTOS CON APANTALLAMIENTO ELECTROMAGNÉTICO
Agencia de Desarrollo Económico de La Rioja
RESINA ALQUIDICA URETANADA ACUOSA LIBRE DE ISOCIONATOS
PROYECTO FINANCIADO CON LAS DOTACIONES PREVISTAS EN LOS PROGRAMAS PRESUPUESTARIOS DE LA AGENCIA DE DESARROLLO
ECONÓMICO DE LA RIOJA CON CARGO A LAS APLICACIONES PRESUPUESTARIAS CORRESPONDIENTES EN EL PROGRAMA
OPERATIVO FEDER DE LA RIOJA (2014-2020)
CDTI
CDTI
Agencia de Desarrollo Económico de La Rioja
NUEVOS RECUBRIMIENTOS CON APANTALLAMIENTO ELECTROMAGNÉTICO
PROYECTO FINANCIADO CON LAS DOTACIONES PREVISTAS EN LOS PROGRAMAS PRESUPUESTARIOS DE LA AGENCIA DE DESARROLLO
ECONÓMICO DE LA RIOJA CON CARGO A LAS APLICACIONES PRESUPUESTARIAS CORRESPONDIENTES EN EL PROGRAMA
OPERATIVO FEDER DE LA RIOJA (2014-2020)
CDTI
Agencia de Desarrollo Económico de La Rioja
GRAPHENE CORE 3
SUPPORTED BY EUROPEAN COMMUNITY'S HORIZON 2020 FRAMEWORK PROGRAMME (H2020-ADHOC-2014-20) GRANT AGREEMENT N° 881603.

LIGNICOAT
SUPPORTED BY EUROPEAN COMMUNITY'S HORIZON 2020 FRAMEWORK PROGRAMME (H2020-BBI-JTI-2020) PROPOSAL N° 101023342.

Barpimo : Varnishes and Paints
Calcco