Follow us: Facebook Linkedin Instagram

Solutions

Paint does not dry

Paint does not dry

Possible causes

Ways of avoiding it

Humid weather

Do not exceed the recommended temperatures

Cold weather

See technical datasheet. As a general rule:

  • Conventional: minimum 3/5ºC
  • Chlorinated rubber: minimum 3/5ºC
  • Epoxy: minimum 10/13ºC

Absorption of the drying agent by the paint

While the lack of absorption of the drying agent is a formulation issue, sometimes the best-formulated products can present this difficulty. The remedy is to add approximately 3% of a suitable drying agent

Greasy, waxed or dirty surface

Clean the surface with volatile solvents after degreasing

When not shaken correctly, the formula of the applied material will not be balanced and this sometimes delays the drying, as we do not achieve the suitable suspension of pigments

Shake the paint completely with the aim of the pigments and liquids spreading in the correct manner

Unsuitable ventilation

Provide suitable ventilation

 

Site Map
Contact

MAIN OFFICES

C/ San Fernando, 116
26300 Nájera, La Rioja (Spain)

T.: (+34) 941 410 000
F.: (+34) 941 410 111

informa@barpimo.com
 

SOCIAL NETWORKS

Facebook Linkedin Instagram

CONTACT YOUR NEAREST LOCAL OFFICE

T.: (+34) 941 410 000
delegations-barpimo-spainDelegations Barpimo Spain

LOCATE OUR DISTRIBUTORS

BARPIMO IN SPAIN

BARPIMO IN THE WORLD:

  • BARPIMO S.A.
    C/ SAN FERNANDO, 116
    CP: 26300 NÁJERA (LA RIOJA)

    T.: (+34) 941 410 000

    VENTAS@BARPIMO.COM

  • RUSSIA

CONTACT SAC (Customer Service Department)

Barpimo S.A. has always focused its efforts on total quality, thus complying with the obligation of a leader in terms of products and services for the customer.

MAIN SAC DEPARTMENT:
T.: (+34) 941 410 000
sac@barpimo.com

SEND US YOUR SUGGESTIONS

QUALITY ASSURANCE CERTIFICATES
QUALITY ASSURANCE CERTIFICATES
The 2014-2015 industrial investment projects have been funded by MINETUR
The 2014-2015 industrial investment projects have been funded by MINETUR
The following projects have been co-financed by the European Regional Development Fund (ERDF), under the Smart Growth Operational Programme 2014-2020, with the purpose of boosting research, technological development, and innovation.
"EPOXY RESIN EMULSIONS FOR HIGH PERFORMANCE WATER-BASED COATINGS"
"DEVELOPMENT OF A NEW RANGE OF HIGHLY EFFECTIVE CATALYTIC PAINTS"
CDTI
“DEVELOPMENT OF FORMULATIONS FOR VARNISHES AND PAINTS EXEMPT FROM HAZARDOUS HEALTH NANOPARTICLES”
OT1. PROMOTE TECHNOLOGICAL DEVELOPMENT; INNOVATION AND A QUALITY RESEARCH
“REPLACEMENT OF HEATING THERMAL GROUPS”
P2. SAVINGS AND ENERGY EFFICIENCY PROJECTS
CDTI
NUEVOS RECUBRIMIENTOS CON APANTALLAMIENTO ELECTROMAGNÉTICO
Agencia de Desarrollo Económico de La Rioja
RESINA ALQUIDICA URETANADA ACUOSA LIBRE DE ISOCIONATOS
PROYECTO FINANCIADO CON LAS DOTACIONES PREVISTAS EN LOS PROGRAMAS PRESUPUESTARIOS DE LA AGENCIA DE DESARROLLO
ECONÓMICO DE LA RIOJA CON CARGO A LAS APLICACIONES PRESUPUESTARIAS CORRESPONDIENTES EN EL PROGRAMA
OPERATIVO FEDER DE LA RIOJA (2014-2020)
CDTI
CDTI
Agencia de Desarrollo Económico de La Rioja
NUEVOS RECUBRIMIENTOS CON APANTALLAMIENTO ELECTROMAGNÉTICO
PROYECTO FINANCIADO CON LAS DOTACIONES PREVISTAS EN LOS PROGRAMAS PRESUPUESTARIOS DE LA AGENCIA DE DESARROLLO
ECONÓMICO DE LA RIOJA CON CARGO A LAS APLICACIONES PRESUPUESTARIAS CORRESPONDIENTES EN EL PROGRAMA
OPERATIVO FEDER DE LA RIOJA (2014-2020)
CDTI
Agencia de Desarrollo Económico de La Rioja
GRAPHENE CORE 3
SUPPORTED BY EUROPEAN COMMUNITY'S HORIZON 2020 FRAMEWORK PROGRAMME (H2020-ADHOC-2014-20) GRANT AGREEMENT N° 881603.

LIGNICOAT
SUPPORTED BY EUROPEAN COMMUNITY'S HORIZON 2020 FRAMEWORK PROGRAMME (H2020-BBI-JTI-2020) PROPOSAL N° 101023342.

Barpimo : Varnishes and Paints
Calcco