Varnishes and Paints

Metal industry

Follow us: Facebook Linkedin Instagram
Imprimación epoxi rica en zinc

Imprimación epoxi rica en zinc

Epoxy primer dried with polyamide with high zinc powder content Two-component primer suitable for the protection of surfaces exposed to highly corrosive atmospheres Good anti-corrosion properties Resistant to high temperatures Gives steel cathodic protection Meets specifications defined under Standard UNE 48277 The final dry film contains more than 80% of zinc metal by weight. MAXIMUM CONTINUOUS TEMPERATURE: Once dry and polymerised the operating temperature can reach 150-200ºC, in turn, depending on the subsequent coat. See general conditions Apply the product when use and curing is at temperatures over 10ºC. At the same time the paint temperature must also be over the limit value Shake contents of containers before use. It is important to ventilate well during application on closed surfaces and subsequent polymerisation Do not store opened or started containers. For toxicological standards, consult FICHA DE SEGURIDAD. Apply with good air renewal. This sheet has been created with informational purposes only and does not replace expert advice. The information provided reflects our current knowledge and have been obtained from our own experience, but under no circumstance do they entail any warranty whatsoever from our part. For this reason, we cannot accept any undesired consequence deriving from its use. 08-07-2015 This sheet replaces all previous versions.

Packaging

This product can be found in the following measurements:

Barpimo envase tamano 1
5 l.

Vocs: 253,5/L. - 10,14%

Estimated spread rate per coat

Calculate
Litres
2-component products, ask.
Industrial and Wood line of products: see technical datasheet.
Site Map
Contact

MAIN OFFICES

C/ San Fernando, 116
26300 Nájera, La Rioja (Spain)

T.: (+34) 941 410 000
F.: (+34) 941 410 111

informa@barpimo.com
 

SOCIAL NETWORKS

Facebook Linkedin Instagram

CONTACT YOUR NEAREST LOCAL OFFICE

T.: (+34) 902 277 466
delegations-barpimo-spainDelegations Barpimo Spain

LOCATE OUR DISTRIBUTORS

BARPIMO IN SPAIN

BARPIMO IN THE WORLD:

  • BARPIMO S.A.
    C/ SAN FERNANDO, 116
    CP: 26300 NÁJERA (LA RIOJA)

    T.: (+34) 941 410 000

    VENTAS@BARPIMO.COM

  • RUSSIA

CONTACT SAC (Customer Service Department)

Barpimo S.A. has always focused its efforts on total quality, thus complying with the obligation of a leader in terms of products and services for the customer.

MAIN SAC DEPARTMENT:
T.: (+34) 902 277 466
sac@barpimo.com

SEND US YOUR SUGGESTIONS

QUALITY ASSURANCE CERTIFICATES
QUALITY ASSURANCE CERTIFICATES
The 2014-2015 industrial investment projects have been funded by MINETUR
The 2014-2015 industrial investment projects have been funded by MINETUR
Barpimo : Varnishes and Paints
Calcco