Varnishes and Paints

Wood industry

Follow us: Facebook Linkedin Instagram
Fondipol ecuador a.v.

Fondipol ecuador a.v.

Twin component, solvent based two component transparent polyurethane undercoat Quick hardening Quick and easy manual or machine sanding Product suitable for sealing wooden joins and indoor furniture If you wish to seal the wood pores, you must sand the first undercoat before applying a second coat In the case of an increase in viscosity after the application, reduce with .9130 If the ambient temperature is high, use .9020 to dilute On this undercoat you can apply any LACAPOL or NITROBARP top coat Alternative hardener:CATALIZADOR N. 294 : Retards drying. Increases coverage. Shake contents of containers before use. Apply with good air renewal. Do not store opened or started containers. Maximum stability of hardener is les than 6 months at 20ºC. For toxicological standards, consult FICHA DE SEGURIDAD. Keep out of the reach of children. This sheet has been created with informational purposes only and does not replace expert advice. The information provided reflects our current knowledge and have been obtained from our own experience, but under no circumstance do they entail any warranty whatsoever from our part. For this reason, we cannot accept any undesired consequence deriving from its use. 19-09-2017 This sheet replaces all previous versions.

Packaging

This product can be found in the following measurements:

Barpimo envase tamano 1
4 l.
200 l.
25 l.
1000 l.

Vocs: 628,47/L. - 64,13%

Estimated spread rate per coat

Calculate
Litres
2-component products, ask.
Industrial and Wood line of products: see technical datasheet.
Site Map
Contact

MAIN OFFICES

C/ San Fernando, 116
26300 Nájera, La Rioja (Spain)

T.: (+34) 941 410 000
F.: (+34) 941 410 111

informa@barpimo.com
 

SOCIAL NETWORKS

Facebook Linkedin Instagram

CONTACT YOUR NEAREST LOCAL OFFICE

T.: (+34) 902 277 466
delegations-barpimo-spainDelegations Barpimo Spain

LOCATE OUR DISTRIBUTORS

BARPIMO IN SPAIN

BARPIMO IN THE WORLD:

  • BARPIMO S.A.
    C/ SAN FERNANDO, 116
    CP: 26300 NÁJERA (LA RIOJA)

    T.: (+34) 941 410 000

    VENTAS@BARPIMO.COM

  • RUSSIA

CONTACT SAC (Customer Service Department)

Barpimo S.A. has always focused its efforts on total quality, thus complying with the obligation of a leader in terms of products and services for the customer.

MAIN SAC DEPARTMENT:
T.: (+34) 902 277 466
sac@barpimo.com

SEND US YOUR SUGGESTIONS

QUALITY ASSURANCE CERTIFICATES
QUALITY ASSURANCE CERTIFICATES
The 2014-2015 industrial investment projects have been funded by MINETUR
The 2014-2015 industrial investment projects have been funded by MINETUR
The following projects have been co-financed by the European Regional Development Fund (ERDF), under the Smart Growth Operational Programme 2014-2020, with the purpose of boosting research, technological development, and innovation.
"EPOXY RESIN EMULSIONS FOR HIGH PERFORMANCE WATER-BASED COATINGS"
"DEVELOPMENT OF A NEW RANGE OF HIGHLY EFFECTIVE CATALYTIC PAINTS"
CDTI
“DESARROLLO DE FORMULACIONES PARA BARNICES Y PINTURAS EXENTAS DE NANOPARTICULAS PELIGROSAS PARA LA SALUD”
OT1. PROMOVER EL DESARROLLO TECNOLÓGICO; INNOVACIÓN Y UNA INVESTIGACIÓN DE CALIDAD
“SUSTITUCIÓN DE GRUPOS TÉRMICOS DE CALEFACCIÓN”
P2. PROYECTOS DE AHORRO Y EFICIENCIA ENERGÉTICA
CDTI
Barpimo : Varnishes and Paints
Calcco