• Out-of-Stock
Outdoor varnish ecobarp to water
search
  • Outdoor varnish ecobarp to water

Outdoor varnish ecobarp to water

Water-based varnish, high quality and high performance
4 l
750 ml
375 ml
C. TECHNIQUES
Colors
C. APPLICATION
Protects and decorates wooden surfaces and constructions indoors and outdoors, doors, windows, etc. Also suitable for finishing and decoration of wooden interiors and exteriors where the protective treatment BARPIDECOR AL AGUA was applied.
Elastic finishes
Does not yellow
Resistant to weather and solar radiation.
Ease of application.
Decorate and enhance the natural beauty of wood.
It repels water and environmental humidity and regulates the traspiration of wood avoiding deformations.

Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 30-60min
Tiempo de secado
T. Repainted 4-6hours
Tiempo de secado
Performance 12-14m2/L
Bright
bright colorless
Satin
colorless satin
Surface preparation

On surfaces without protector and without varnish: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous case. On surfaces with BARPIDECOR WATER BOTTOM protector (.2872) or WATER BARPIDECOR COLORS: Apply one or two layers depending on the applied hands of protector.

Before applying

Application temperature: Above 10ºC. Ambient relative humidity: Less than 80%. Humidity of the support to be applied: Less than 20%

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Apply three hands, the 1st hand diluted by 5 – 10%; the 2nd and 3rd hand to use or slightly diluted (maximum 5%). Sand gently between layers to facilitate adhesion and improve finish. On tropical woods apply previously, depending on the type of wood, 1 – 2 hands of INSULATING SEALANT TROPICAL WOODS (Ref. I6860). Percentage of application: Brush, 1st hand diluted 5 - 10% with water. 2nd and 3rd hand to use or slightly diluted (maximum 5%). Gun, Depending on the nozzle and pressure used in the application. Previous background (optional): Barpidecor Water bottom (.2872) and/or Barpidecor colors.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent