- Out-of-Stock
Marine Varnish
High quality marine varnish4 l
750 ml
375 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for protecting and decorating surfaces of boats and wooden constructions near the sea, outdoors. Decorative finish in interiors.
Resistance to marine environments
Incorporates filto U.V.
Elastic finishes
Filling power.
Resistant to the expansions and contractions of wood.
Bright
bright colorless
Satin
colorless satin
Surface preparation
Surfaces should be clean, dry and consistent. On unprotected and unvarnished surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous case. On surfaces with barpidecor bottom protector (B6811) or BARPIDECOR COLORS: Apply one or two hands, depending on the hands applied as a protector.
Before applying
Application temperature: Above 10ºC. Ambient relative humidity: Less than 70%. Humidity of the support to be applied: Less than 20%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Brush, 1st hand diluted 5 - 10% with Synthetic and Fatty Diluent 250 (Ref. 9873). 2nd and 3rd hand to use or slightly diluted (maximum 5%) . Gun, Depending on the nozzle and pressure used in the application. Apply three properly diluted hands, sand gently between layers to facilitate adhesion and improve the finish. Previous background: Barpidecor Background (B6811) and/or Barpidecor colors.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount
--
Related products
Suitable for protecting and decorating surfaces of boats and wooden constructions near the sea, outdoors. Decorative finish in interiors.