- Out-of-Stock
Synthetic varnish
Synthetic varnish of high decoration and quality20 l
4 l
750 ml
375 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for protection and decoration of wooden surfaces indoors and exceptionally outdoors, frames, stairs and doors.
Ease of application.
Filling power.
Resistant
Finish with balanced hardness and elasticity
Compatible on woods previously treated with the Barpidecor Fondo (B6811) or Barpidecor Colores.
Also innable with Barpidecor protectors.
Bright
bright colorless
Satin
colorless satin
Matte
matte colorless
Surface preparation
Surfaces should be clean, dry and consistent. On unvarnished surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. Apply two or three hands depending on the type of wood, sand gently between layers to facilitate adhesion and improve the finish. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous case. On surfaces with barpidecor bottom protector (B6811) or BARPIDECOR COLORS: Apply one or two hands, depending on the hands applied as a protector.
Before applying
Application temperature: Above 8ºC. Ambient relative humidity: Less than 80%. Humidity of the support to be applied: Less than 20%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Brush, 1st hand diluted 5-10 % with Synthetic and Fatty Diluent 250 (Ref. 9873). Gun, depending on the nozzle and pressure used in the application. It does not require prior fund.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount
--
Related products
Suitable for protection and decoration of wooden surfaces indoors and exceptionally outdoors, frames, stairs and doors.