- Out-of-Stock
Polparquet ecobarp to the water
Water-based varnish for parquet varnish4 l
750 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for sealing and finishing wooden floors indoors
Ease of application.
Filling power.
Maximum performance
Adherent, durable, noble and decorative finishes.
Resistant to abrasion, wear, scrubbing, pouring of domestic cleaning agents and alkalis.
Bright
bright colorless
Satin
colorless satin
Matte
matte colorless
Surface preparation
Surfaces should be clean, dry and consistent. On unvarnished surfaces: Clean and sand, remove dust, grease, oil waxes, small imperfections, etc. Sand gently between layers to facilitate adhesion and improve finish. On surfaces already varnished and / or aged and deteriorated: Remove varnish in poor condition and proceed as in unvarnished surfaces.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%. Support humidity to be applied: Less than 8%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Brush or Roller: Apply the first hand diluted 10-15% with Water. The second and third hands, slightly diluted (5%) or to use. Gun, depending on the nozzle and pressure used. Sand gently between layers to facilitate adhesion and improve finish.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount
--
Related products
Suitable for sealing and finishing wooden floors indoors