- Out-of-Stock
Barplast Basic
Decorative acrylic paint, covering, provides decorative, smooth and uniform finishesSurfaces should be clean, dry, free of dust, grease, saltpeter, chipped and consistent. On dry and hard unpainted surfaces (well-set plaster): application of 2 hands: the first diluted by 10% and the second slightly diluted (maximum by 5%) or on use. On soft surfaces (poorly set plaster) or with old plastic paints, tempera, lime and other paints: Remove soft, crumbly, chipped parts, etc. and remove all lime. Then seal with SELLAFOND AL AGUA (.1894) and proceed as on unpainted surfaces. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application Brush and Roller, The 1st hand slightly diluted with water (maximum 10%), the 2nd to use or slightly diluted (maximum 5%) Gun, depending on the nozzle and pressure used.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need: