• Out-of-Stock
Barplast Alboran
search
  • Barplast Alboran

Barplast Alboran

Decorative acrylic paint with good coverage and whiteness
15 l
13 l
4 l
750 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for decoration of interior surfaces such as plaster and plaster walls and ceilings. For decoration work in general.
Excellent whiteness.
Washable
Smooth and uniform finish
Ease of application.
Great covering power.
Maximum performance.

Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 30min
Tiempo de secado
T. Repainted 2-4hours
Tiempo de secado
Performance 7-10m2/L
Matte
matte white
Surface preparation

Surfaces should be clean, dry, free of dust, grease, saltpeter, chipped and consistent. On dry and hard unpainted surfaces (well-set plaster): application of 2 hands: the first diluted by 10% and the second slightly diluted (maximum by 5%) or on use. On soft surfaces (poorly set plaster) or with old plastic paints, tempera, lime and other paints: Remove soft, crumbly, chipped parts, etc. and remove all lime. Then seal with SELLAFOND AL AGUA (.1894) and proceed as on unpainted surfaces. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces

Before applying

Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%

How to use

Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application Brush and Roller, The 1st hand slightly diluted with water (maximum 10%), the 2nd to use or slightly diluted (maximum 5%) Airless gun, depending on the nozzle and pressure used.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent