- Out-of-Stock
Barplast goteable
Washable plastic paint prepared to project with drop projection equipment "gotelé"15 l
4 l
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for decoration of interior surfaces such as plaster and plaster walls and ceilings with decorative effect in drop "gotelé" of high quality, other decorative effects can also be performed in relief (chopped, scratched, etc.)
Ease of application.
Dripping finishes
Washable, without cracking
In tune with our Water Dyes.
Matte
matte white
Surface preparation
Surfaces should be clean, dry, free of dust, grease, saltpeter, chipped and consistent. On dry and hard unpainted surfaces (well-set plaster): seal with SELLAFOND AL AGUA (.1894) or with the same product diluted by 10%. Then apply the product to use or slightly diluted (maximum 3%). On soft surfaces (poorly set plaster) or with old plastic paints, tempera, lime and other paints: Remove soft, crumbly, chipped parts, etc. and remove all lime. Then seal with SELLAFOND AL AGUA (.1894) and proceed as on unpainted surfaces.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Gotele projection equipment and Application of effects, Water, to use or slightly diluted (maximum 3%)
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount
--
Related products
Suitable for decoration of interior surfaces such as plaster and plaster walls and ceilings with decorative effect in drop "gotelé" of high quality, other decorative effects can also be performed in relief (chopped, scratched, etc.)