- Out-of-Stock
Barplast 40
Acrylic-vinyl paint of excellent covering power to a single layer.15 l
4 l
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for interior decoration, such as plaster and plaster walls and ceilings with high-quality matte finish.
Exceptional performance
Low cost
Ease of application.
Great covering power both wet and dry.
Filling power.
Finishes with maximum whiteness, smooth, uniform, durable and high quality.
Matte
matte white
Surface preparation
Surfaces should be clean, dry, free of dust, grease, saltpeter, chipped and consistent. On unpainted, dry surfaces (well-set plaster): application of 2 hands: the first diluted by 10% and the second to use or slightly diluted (maximum 5%). On soft surfaces (poorly set plaster) or with old plastic paints, tempera, lime and other paints: Remove soft, crumbly, chipped parts, etc. and remove all lime. Then seal with SELLAFOND AL AGUA (.1894) and proceed as on unpainted surfaces. On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Percentage of application: Brush and Roller, Water The 1st hand slightly diluted (maximum 10%), the 2nd to use or slightly diluted (maximum 5%), Airless gun, depending on the nozzle and pressure used.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount
--
Related products
Suitable for interior decoration, such as plaster and plaster walls and ceilings with high-quality matte finish.