- Out-of-Stock
Siliconized barpxil
Quality silicone coating15 l
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for waterproofing, protection and decoration of facades, walls; in general any external vertical surface and cement mortars, concrete ..., where moisture produces damage and harmful effects.
Coat surfaces with lime
Waterproof the facades
Anti-mold preservative
Ease of application.
Filling power
Resistant to the alkalinity of concrete supports, cement mortars, brick, etc.
Matte
matte white
Surface preparation
Surfaces should be clean, dry, free of dust, grease, oils, moisture, chipped and consistent. On new surfaces (cement mortar without saltpeter), apply 2 crossed layers: the 1st diluted to 5-10% water, the 2nd to use or slightly diluted (maximum 5%). On soft surfaces (mortars in poor condition) or with saltpeters, old plastic paints, lime and other paints: Remove soft, crumbly, chipped and damp parts. Also remove lime and saltpeters. Seal properly with SELLAFOND (Ref .1764) and proceed as in the previous case.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%. Support temperature above 8ºC.
How to use
Remove the contents of the container well. Apply in uniform layers. Apply with good air renewal. Application to brush, roller and airless gun. Do not apply if there is a risk of rain and frost. It is not convenient to apply in full sun and with high temperatures of the support.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount
--
Related products
Suitable for waterproofing, protection and decoration of facades, walls; in general any external vertical surface and cement mortars, concrete ..., where moisture produces damage and harmful effects.