- Out-of-Stock
Multiplast standard
Indoor powder plasterIndicated to recover small surface defects or smooth the surfaces in usual supports of plaster and / or cement, of normal setting.
Surface preparation
The surface has to be clean, dry, without grease, dust, saltpeter, chipped and be consistent. Knead with water at a rate of 38-43%. Kneading must be done manually or mechanically using an electric mixer. Let the paste sit for a few minutes and then apply
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Make application proceeding to the filling of irregularities and always smoothing vertically from bottom to top. The joints are made on the contrary, from top to bottom. Sanded once dry and hard, reapply a second hand horizontally from right to left, taking the joints from left to right. After drying, sand and proceed to paint.
Storage
Store in a cool place. Do not store open or started containers.
Indicated to recover small surface defects or smooth the surfaces in usual supports of plaster and / or cement, of normal setting.
Surface preparation
The surface has to be clean, dry, without grease, dust, saltpeter, chipped and be consistent. Knead with water at a rate of 38-43%. Kneading must be done manually or mechanically using an electric mixer. Let the paste sit for a few minutes and then apply
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Make application proceeding to the filling of irregularities and always smoothing vertically from bottom to top. The joints are made on the contrary, from top to bottom. Sanded once dry and hard, reapply a second hand horizontally from right to left, taking the joints from left to right. After drying, sand and proceed to paint.
Storage
Store in a cool place. Do not store open or started containers.
Data sheet
- Family
- Rehabilitation and preparations
- Surface
- Cement
Concrete
Plaster
Plastic Paint - Feature Listed 1
- NORMAL SETTING
- Feature listed 2
- EASY TO APPLY
- Subname
- Indoor powder plaster
- Feature listed 3
- APPLICABLE IN THIN LAYER.
- Barpicolor
- No
- Featured product 1
- Normal setting
- Featured product 2
- Easy to apply
- Featured product 3
- Applicable in thin layer.
- Featured product 4
- Smoothing of defective walls (scratches
- i-dilution
- Knead with water at a rate of 38-43%
- i-t.drying
- 3-6hours
- Water / solvent
- Water
- s-certificate euroclasses 1
- No
- s-certified slippage 2
- No
- s-certified anticorrosive enamels 3
- No
- s-certified mushrooms 4
- No
- s-bacterial certificate 5
- No
- s-certificate guarantee three 6
- No
- s-certificate warranty five 7
- No
- s-certificate guarantee seven 8
- No
- s-certificate guarantee eight 9
- No
- s-certificate guarantee ten 10
- No
- s-certificate guarantee fifteen 11
- No
- s-certificate A 12
- No
- s-certificate A+ 13
- No
- s-certificate B 14
- No
- s-certificate C 15
- No
- s-certificate anti-mold preservative 16
- No
- s-certified UV filter 17
- No
- s-ecolabel 18 certificate
- No
- s-CE certificate 19
- No
- s-certificate anticarbonation 20
- No
- s-certificate Pliolite 21
- No
- s-certificate cidemco 22
- No
- SMOOTHING AND SANDING.
- 16
21 - …).
- 23
- 80m2/mm thickness
- 31
- i-Performance 1Kg
- Depending on the thickness applied