- Out-of-Stock
Multiplast renovation
Interior plastering for the recovery and renovation of supports with plasticized gotelé and supports where the application in thickness is necessary15 kg
5 kg
C. TECHNIQUES
Colors
C. APPLICATION
Indicated for supports with plasticized gotelé, as well as in plaster and / or plaster supports where the application of thickness is necessary.
Easy to apply
Smooth and fine finishes.
It does not start when passing iron.
Good covering power.
Suitable for the renewal and leveling of supports.
Smoothing of defective walls (scratches
Colors
white
Surface preparation
The surface has to be clean, dry, without grease, dust, saltpeter, chipped and be consistent. Knead with water at a rate of 43-45%. Kneading must be done manually or mechanically using an electric mixer. Let the paste rest for a few minutes and then apply.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Make application proceeding to the filling of irregularities and always smoothing vertically from bottom to top. The joints are made on the contrary, from top to bottom. Sanded once dry and hard, reapply a second hand horizontally from right to left, taking the joints from left to right. After drying, sand and proceed to paint.
Storage
Store in a cool place. Do not store open or started containers.
Related products
Indicated for supports with plasticized gotelé, as well as in plaster and / or plaster supports where the application of thickness is necessary.