- Out-of-Stock
Multiplast ceramic cover
Plastered in extra-white fibered paste of interior and exterior in water base. Special for low absorbent funds. Ceramic coverThe surface has to be clean, dry, without grease, dust, saltpeter, chipped and be consistent.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Product ready for use. Make application proceeding to the filling of irregularities and always smoothing vertically from bottom to top. The joints are made on the contrary, from top to bottom. Sanded once dry and hard, reapply a second hand horizontally from right to left, taking the joints from left to right. After drying, sand and proceed to paint.
Storage
Store in a cool place. Do not store open or started containers.
The surface has to be clean, dry, without grease, dust, saltpeter, chipped and be consistent.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Product ready for use. Make application proceeding to the filling of irregularities and always smoothing vertically from bottom to top. The joints are made on the contrary, from top to bottom. Sanded once dry and hard, reapply a second hand horizontally from right to left, taking the joints from left to right. After drying, sand and proceed to paint.
Storage
Store in a cool place. Do not store open or started containers.
Data sheet
- Family
- Rehabilitation and preparations
- Surface
- Cement
Enamels
Plaster
Plaster
Plasterboard
Plastic Paint
Stoneware - Feature Listed 1
- BUNDLE.
- Feature listed 2
- EASY SANDING.
- Subname
- Plastered in extra-white fibered paste of interior and exterior in water base. Special for low absorbent funds. Ceramic cover
- Feature listed 3
- SCENTED.
- Barpicolor
- No
- Featured product 1
- Bundle.
- Featured product 2
- Easy sanding.
- Featured product 3
- Scented.
- Featured product 4
- Thin layer application.
- Featured product 5
- Supports polishing without surface coloration changes.
- Featured product 6
- Good adhesion, excellent finesse and workability.
- i-dilution
- Not accurate
- i-t.drying
- 24hours
- Product Featured 7
- Ease of application and smoothing.
- i-performance
- 1 mm layer:1.5-2.0 Kg/m2
- Water / solvent
- Water