- Out-of-Stock
Multiplast exterior to use
Plastered in light paste and reinforced with fiberglass intended for the filling of imperfections and the leveling of irregularities in absorbent supports both in thin layer and thickness.The surface has to be clean, dry, without grease, dust, saltpeter, chipped and be consistent.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Product ready for use. Make application proceeding to the filling of irregularities and always smoothing vertically from bottom to top. The joints are made on the contrary, from top to bottom. Sanded once dry and hard, reapply a second hand horizontally from right to left, taking the joints from left to right. After drying, sand and proceed to paint.
Storage
Store in a cool place. Do not store open or started containers.
The surface has to be clean, dry, without grease, dust, saltpeter, chipped and be consistent.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Product ready for use. Make application proceeding to the filling of irregularities and always smoothing vertically from bottom to top. The joints are made on the contrary, from top to bottom. Sanded once dry and hard, reapply a second hand horizontally from right to left, taking the joints from left to right. After drying, sand and proceed to paint.
Storage
Store in a cool place. Do not store open or started containers.
Data sheet
- Family
- Rehabilitation and preparations
- Surface
- Brick
Cement
Concrete
Stone - Feature Listed 1
- EXCELLENT FILLING CAPACITY.
- Feature listed 2
- CAN BE TINTED.
- Subname
- Plastered in light paste and reinforced with fiberglass intended for the filling of imperfections and the leveling of irregularities in absorbent supports both in thin layer and thickness.
- Feature listed 3
- MINIMAL SHRINKAGE.
- Barpicolor
- No
- Featured product 1
- Excellent filling capacity.
- Featured product 2
- It can be tinted.
- Featured product 3
- Minimal shrinkage.
- Featured product 4
- Excellent adhesion, great cohesion and hardness.
- Featured product 5
- Ease of applying, smoothing and sanding.
- i-dilution
- Not accurate
- i-t.drying
- 24hours
- i-performance
- layer of 1 mm 1.45-1.65 Kg/m2
- Water / solvent
- Water
- s-certificate euroclasses 1
- No
- s-certified slippage 2
- No
- s-certified anticorrosive enamels 3
- No
- s-certified mushrooms 4
- No
- s-bacterial certificate 5
- No
- s-certificate guarantee three 6
- No
- s-certificate warranty five 7
- No
- s-certificate guarantee seven 8
- No
- s-certificate guarantee eight 9
- No
- s-certificate guarantee ten 10
- No
- s-certificate guarantee fifteen 11
- No
- s-certificate A 12
- No
- s-certificate A+ 13
- No
- s-certificate B 14
- No
- s-certificate C 15
- No
- s-certificate anti-mold preservative 16
- No
- s-certified UV filter 17
- No
- s-ecolabel 18 certificate
- No
- s-CE certificate 19
- No
- s-certificate anticarbonation 20
- No
- s-certificate Pliolite 21
- No
- s-certificate cidemco 22
- No