• Out-of-Stock
Anhydrex ecobarp to water
search
  • Anhydrex ecobarp to water

Anhydrex ecobarp to water

Invisible water repellent for facades based on special resins in aqueous medium
15 l
4 l
750 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for waterproofing facades of exposed brick, stone, concrete, mortars and roofs without modifying their decorative appearance.
Anti-humidity and anti-mold
Penetrating.
Very permeable to the interior moisture of the substrate.
Avoid the exit of efflorescences or saltpeters.
Resistant to the alkalinity of substrates.
Waterproofing in facades. The rain is repelled, dirt is deposited and favors its cleaning.

Tiempo de secado
Dilution Water
Tiempo de secado
T. Drying 30-60min
Tiempo de secado
Performance 1 - 4 m²/L
Colors
colourless
Surface preparation

Surfaces should be clean, dry, free of dust, grease, oils, moisture, chipped and consistent.

Before applying

Application temperature: Higher than 5ºC. Ambient relative humidity: Less than 80% Support humidity: 6%. Support temperature above 5ºC.

How to use

Remove the contents of the container well. Apply with good air renewal. Apply two successive hands wet on wet saturating in both the support. In each hand, apply until the support is saturated. Proceed by small surfaces, so that the product is applied after having absorbed the previous hand. Do not dilute it, the product is served ready for use.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent