- Out-of-Stock
Waterproofing varnish
Waterproofing for water facades15 l
4 l
750 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for waterproofing facades of exposed brick, stone, concrete, mortars, etc. in semi-matte-satin appearance finish. Suitable as a sealant on plaster surfaces, well-set and consistent mortars.
Ease of application.
Filling power.
Waterproof and adherent finish
Very permeable to the interior humidity of the substrates.
Resistant to the alkalinity of substrates.
Semi-Matte
colorless semi-matte-satin
Surface preparation
Surfaces should be clean, dry, free of dust, grease, oils, moisture, chipped and consistent. Apply 1 or 2 hands, dilute up to 100%, depending on the appearance of the finish you want.
Before applying
Application temperature: Higher than 5ºC. Ambient relative humidity: Less than 80% Support humidity: 6%. Support temperature above 8ºC.
How to use
Remove the contents of the container well. Apply with good air renewal, in uniform and well-extended layers. Do not apply if there is a risk of rain or frost. It is not convenient to apply in full sun and with high temperatures of the support. Percentage of application: Brush, roller or gun, Water, 0-100% according to the appearance of finish and thickness desired.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount
--
Related products
Suitable for waterproofing facades of exposed brick, stone, concrete, mortars, etc. in semi-matte-satin appearance finish. Suitable as a sealant on plaster surfaces, well-set and consistent mortars.