Good adhesion on different substrates. Ideal to apply on floors, plastics, PVC, etc. It can be used as an adhesion bridge for floors painted with chlororubber, subsequently painting it with epoxy or polyurethane. Suitable for concrete, PVC, plastic, glass, ceramics, etc.
Abrasion resistant
Excellent adhesion and hardness.
Antioxidant action.
Repaintable with both water-based and solvent-based products.
Adhesion bridge over chlororubber paints for subsequent finishing with epoxy or polyurethane.
Prevents the formation of dust from the soil
DilutionWater
T. Drying30-60min
T. Repainted24hours
Performance5-8 m2/kg
Matte
matte white
Surface preparation
Surfaces should be sanded, clean, dry, free of dust, grease, oils and moisture. Clean, dry soil and well-set concrete on new floors (28 days). Residual soil moisture less than 6%. Preferably with roughness to improve adhesion. On unpainted surfaces: apply 1 - 2 hands (maximum dilution 10%) On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces On surfaces with paints in good condition: Sand, clean and proceed as on unpainted surfaces.
Before applying
Do not apply with temperatures below 12ºC. Ambient relative humidity below 80%. Residual soil moisture less than 6%. Support temperature above 8ºC.
How to use
It is supplied in two containers: Component A and Component B. Component A: Epoxy Primer with White Matte Water (4 Kg or 20Kg) Component B: Catalyst K0864 (0.5 Kg or 2.5 Kg). Mechanically shake Component A until a homogeneous paste is obtained. Add Component B over Component A in its entirety. Proportion of the mixture by weight: 8 parts of "A" and 1 part of "B". Mechanically shake the mixture until a homogeneous paste is obtained again. Let stand 10 – 15 minutes. Apply with good air renewal, in thin, uniform and well-extended layers. Apply with good air renewal, in thin, uniform and well-extended layers. Apply one or more layers to recommended thickness.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount--
Good adhesion on different substrates. Ideal to apply on floors, plastics, PVC, etc. It can be used as an adhesion bridge for floors painted with chlororubber, subsequently painting it with epoxy or polyurethane. Suitable for concrete, PVC, plastic, glass, ceramics, etc.
Surfaces should be sanded, clean, dry, free of dust, grease, oils and moisture. Clean, dry soil and well-set concrete on new floors (28 days). Residual soil moisture less than 6%. Preferably with roughness to improve adhesion. On unpainted surfaces: apply 1 - 2 hands (maximum dilution 10%) On surfaces with old paints: Remove paint in poor condition and proceed as on unpainted surfaces On surfaces with paints in good condition: Sand, clean and proceed as on unpainted surfaces.
Before applying
Do not apply with temperatures below 12ºC. Ambient relative humidity below 80%. Residual soil moisture less than 6%. Support temperature above 8ºC.
How to use
It is supplied in two containers: Component A and Component B. Component A: Epoxy Primer with White Matte Water (4 Kg or 20Kg) Component B: Catalyst K0864 (0.5 Kg or 2.5 Kg). Mechanically shake Component A until a homogeneous paste is obtained. Add Component B over Component A in its entirety. Proportion of the mixture by weight: 8 parts of "A" and 1 part of "B". Mechanically shake the mixture until a homogeneous paste is obtained again. Let stand 10 – 15 minutes. Apply with good air renewal, in thin, uniform and well-extended layers. Apply with good air renewal, in thin, uniform and well-extended layers. Apply one or more layers to recommended thickness.
Storage
Store in a cool place. Do not store open or started containers.
J6744 (Componente A)-4-5
Data sheet
Family
Anticorrosive primers and preparations
Surface
Ceramics
Concrete
Glass
PVC
Plastic
Feature Listed 1
ABRASION RESISTANT
Feature listed 2
EXCELLENT ADHESION AND HARDNESS.
Subname
Water epoxy multipurpose primer two components
Feature listed 3
ANTIOXIDANT ACTION.
Barpicolor
No
Featured product 1
Abrasion resistant
Featured product 2
Excellent adhesion and hardness.
Featured product 3
Antioxidant action.
Featured product 4
Repaintable with both water-based and solvent-based products.
Featured product 5
Adhesion bridge over chlororubber paints for subsequent finishing with epoxy or polyurethane.
Featured product 6
Prevents the formation of dust from the soil
i-dilution
Water
i-t.drying
30-60min
Product Featured 7
Wear resistant
i-t.repainted
24hours
i-performance
5-8 m2/kg
i-n layers
1-2
I calculate performance
5-8m2/L
Water / solvent
Water
I calculate layers
2
s-certificate euroclasses 1
No
s-certified slippage 2
No
s-certified anticorrosive enamels 3
No
s-certified mushrooms 4
No
s-bacterial certificate 5
No
s-certificate guarantee three 6
No
s-certificate warranty five 7
No
s-certificate guarantee seven 8
No
s-certificate guarantee eight 9
No
s-certificate guarantee ten 10
No
s-certificate guarantee fifteen 11
No
s-certificate A 12
No
s-certificate A+ 13
No
s-certificate B 14
No
s-certificate C 15
No
s-certificate anti-mold preservative 16
No
s-certified UV filter 17
No
s-ecolabel 18 certificate
No
s-CE certificate 19
No
s-certificate anticarbonation 20
No
s-certificate Pliolite 21
No
s-certificate cidemco 22
No
prevents erosion and wear by facilitating its cleaning.