- Out-of-Stock
Tropical wood insulating sealant
Transparent single-component insulating impregnant750 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for impregnation and insulating primer of tropical wood surfaces outdoors and indoors. Sealing of wood knots.
Colourless
Penetrating and pore-filled
Blocker of tannins and extracts of tropical woods.
Facilitates the adhesion of subsequent layers of other products
Ease of application.
Matte
matte colorless
Surface preparation
On unvarnished surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous case.
Before applying
Ambient relative humidity Less than 70%. Support humidity Less than 15%. Application temperature Higher than 10ºC.
How to use
Remove the contents of the container well. Do not apply with temperatures below 10ºC. Apply with good air renewal, in thin, uniform and well-extended layers. Apply one or two hands, properly diluted, depending on the type of tropical wood. Finish: with any lasur or water-based varnish. It does not require prior background. Percentage of application: Brush Water Dilute slightly 5 – 10%, Airless gun Water To use or dilute slightly 5 – 10%, Airbrush gun Water To use or slightly dilute 5 – 10%.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount
--
Related products
Suitable for impregnation and insulating primer of tropical wood surfaces outdoors and indoors. Sealing of wood knots.