- Out-of-Stock
Barpidecor high water protection
Protective satin finish of wood4 l
750 ml
375 ml
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for finishing and protection of surfaces and wooden constructions outdoors and exceptionally in interiors, windows, beams, doors and trusses.
Greater durability.
High protection.
Increased performance.
High solids
Repels water and environmental moisture
Resistant to weather and solar radiation.
Satin
colorless satin
chestnut satin
Colors
walnut
pine
mahogany
teak
oak
rosewood
Surface preparation
On unprotected surfaces: Clean, sand and remove dust, grease, oil, waxes and small imperfections. On surfaces with already aged protectors: Sand and remove dust. On surfaces with aged and deteriorated varnish: Remove these layers and proceed as in the previous cases.
Before applying
Do not apply with temperatures above 8ºC. Ambient relative humidity below 80%. Support humidity less than 20%.
How to use
Remove the contents of the container well. Apply with good air renewal, in thin, uniform and well-extended layers. Sand gently between layers. Exceptionally apply 3 hands, depending on the orientation and environmental conditions where the surface is exposed. If with 1 hand the desired tone is obtained, apply the second hand with BARPIDECOR HIGH PROTECTION TO COLORLESS WATER (Ref. 2993). Use BARPIDECOR HIGH PROTECTION TO COLORLESS WATER (Ref. 2993) only to renew woods already treated with color or to attenuate other tones. On tropical woods apply previously, depending on the type of wood, 1 – 2 hands of INSULATING SEALANT TROPICAL WOODS (Ref. I6860). As a complement to the treatment, apply BARPIDECOR FONDO primer (Ref. B6811). Percentage of application: Brush, 1st hand to use or slightly diluted with water (maximum 5%). 2nd and 3rd hand to use. Gun, Depending on the nozzle and pressure used in the application.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need:
Total area
m2
nth Layers
Necessary amount
--
Related products
Suitable for finishing and protection of surfaces and wooden constructions outdoors and exceptionally in interiors, windows, beams, doors and trusses.