- Out-of-Stock
Barpilite top
Facade cladding based on PLIOLITE resin that is fully waterproof and breathableSurfaces should be clean, dry, free of dust, grease, oils, moisture, chipped and consistent. On new surfaces (cement mortar without saltpeter), apply 2 crossed layers: the 1st diluted to 5-10% with Synthetic and Fatty Diluent (Ref. 9873), the 2nd to use or slightly diluted (maximum 5%) with Synthetic and Fatty Diluent (Ref. 9873). On soft surfaces (mortars in poor condition) or with saltpeters, old plastic paints, lime and other paints: Remove soft, crumbly, chipped and damp parts. Also remove lime and saltpeters. Apply as a sealant the very diluted product, 20-25% with Synthetic and Fatty Diluent (Ref. 9873) and proceed as in the previous case.
Before applying
Application temperature: Above 8ºC. Ambient relative humidity: Less than 80%. Support temperature above 8ºC.
How to use
Remove the contents of the container well. Apply in uniform layers. Apply with good air renewal. Percentage of application: Brush and Roller, The 1st hand diluted (5 -10%), the 2nd to use or slightly diluted (maximum 5%) with Synthetic and Fatty Diluent (Ref. 9873) Gun, Dilute depending on the nozzle and pressure used.
Storage
Store in a cool place. Do not store open or started containers.
Calculate how much you need: