• Out-of-Stock
Barpilite top
search
  • Barpilite top

Barpilite top

Facade cladding based on PLIOLITE resin that is fully waterproof and breathable
15 l
4 l
C. TECHNIQUES
Colors
C. APPLICATION
Suitable for protection and decoration of facades, especially for rehabilitations that require maximum adhesion and resistance to the outside.
Anticarbonation
Weather and rain resistant at 30min of the application
Waterproof and breathable
Resistant to alkalinity of substrates
Flexible finishes
Great covering power.

Tiempo de secado
Dilution .9873
Tiempo de secado
T. Drying 2-3hours
Tiempo de secado
T. Repainted 12hours
Tiempo de secado
Performance 5-7m2/L
Matte
matte white
Surface preparation

Surfaces should be clean, dry, free of dust, grease, oils, moisture, chipped and consistent. On new surfaces (cement mortar without saltpeter), apply 2 crossed layers: the 1st diluted to 5-10% with Synthetic and Fatty Diluent (Ref. 9873), the 2nd to use or slightly diluted (maximum 5%) with Synthetic and Fatty Diluent (Ref. 9873). On soft surfaces (mortars in poor condition) or with saltpeters, old plastic paints, lime and other paints: Remove soft, crumbly, chipped and damp parts. Also remove lime and saltpeters. Apply as a sealant the very diluted product, 20-25% with Synthetic and Fatty Diluent (Ref. 9873) and proceed as in the previous case.

Before applying

Application temperature: Above 8ºC. Ambient relative humidity: Less than 80%. Support temperature above 8ºC.

How to use

Remove the contents of the container well. Apply in uniform layers. Apply with good air renewal. Percentage of application: Brush and Roller, The 1st hand diluted (5 -10%), the 2nd to use or slightly diluted (maximum 5%) with Synthetic and Fatty Diluent (Ref. 9873) Gun, Dilute depending on the nozzle and pressure used.

Storage

Store in a cool place. Do not store open or started containers.

Calculate how much you need:

Total area
m2
nth Layers
Necessary amount --
Cookie consent