- Out-of-Stock
Multiplast plastic putty
Putty indicated for the recovery of small holes, marks, fissures and cracks of non-structural origin inside.The surface has to be clean, dry, without grease, dust, saltpeter, chipped and be consistent.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Product ready for use. Make application proceeding to the filling of irregularities and always smoothing vertically from bottom to top. The joints are made on the contrary, from top to bottom. Sanded once dry and hard, reapply a second hand horizontally from right to left, taking the joints from left to right. After drying, sand and proceed to paint.
Storage
Store in a cool place. Do not store open or started containers.
The surface has to be clean, dry, without grease, dust, saltpeter, chipped and be consistent.
Before applying
Application temperature: Above 5ºC. Ambient relative humidity: Less than 80%
How to use
Product ready for use. Make application proceeding to the filling of irregularities and always smoothing vertically from bottom to top. The joints are made on the contrary, from top to bottom. Sanded once dry and hard, reapply a second hand horizontally from right to left, taking the joints from left to right. After drying, sand and proceed to paint.
Storage
Store in a cool place. Do not store open or started containers.
Data sheet
- Family
- Rehabilitation and preparations
- Surface
- Cement
Fiberglass fabric
Gotelé
Plaster
Plaster
Plastic Paint - Feature Listed 1
- EXCELLENT WORKABILITY.
- Feature listed 2
- EASY SANDING AND SMOOTHING
- Subname
- Putty indicated for the recovery of small holes, marks, fissures and cracks of non-structural origin inside.
- Feature listed 3
- IT DOESN'T HANG UP.
- Barpicolor
- No
- Featured product 1
- Excellent workability.
- Featured product 2
- Easy sanding and smoothing
- Featured product 3
- It doesn't hang up.
- Featured product 4
- It is not mounted or rolled in the joints.
- Featured product 5
- Great covering power.
- i-dilution
- Not accurate
- i-t.drying
- 10-12hours
- i-performance
- 0.65 Kg/m2
- Water / solvent
- Water
- s-certificate euroclasses 1
- No
- s-certified slippage 2
- No
- s-certified anticorrosive enamels 3
- No
- s-certified mushrooms 4
- No
- s-bacterial certificate 5
- No
- s-certificate guarantee three 6
- No
- s-certificate warranty five 7
- No
- s-certificate guarantee seven 8
- No
- s-certificate guarantee eight 9
- No
- s-certificate guarantee ten 10
- No
- s-certificate guarantee fifteen 11
- No
- s-certificate A 12
- No
- s-certificate A+ 13
- No
- s-certificate B 14
- No
- s-certificate C 15
- No
- s-certificate anti-mold preservative 16
- No
- s-certified UV filter 17
- No
- s-ecolabel 18 certificate
- No
- s-CE certificate 19
- No
- s-certificate anticarbonation 20
- No
- s-certificate Pliolite 21
- No
- s-certificate cidemco 22
- No